Spectral Investigations of Preferential Solvation and Solute–Solvent Interactions of Free Base and Protonated 5,10,15,20-Tetrakis(4-trimethyl-ammonio-phenyl)-porphine Tetratosylate in Aqueous Organic Mixed Solvents

The solvatochromic properties of the free base and the protonated 5,10,15,20-tetrakis(4-trimethyl-ammonio-phenyl)-porphine tetratosylate (TTMAPP) were studied in pure water, methanol, ethanol, 2-propanol, and their corresponding aqueous mixtures. The correlation of the empirical solvent polarity scale (E _T) values of TTMAPP with composition of the solvents were analyzed by the solvent exchange model of Bosch and Roses to clarify the preferential solvation of the probe dyes in the binary mixed solvents. The solvation shell composition effects in preferential solvation of the solute dyes were investigated in terms of both solvent–solvent and solute–solvent interactions and also the local mole fraction of each solvent composition was calculated in the cybotactic region of the probe. The effective mole fraction variation may provide significant physicochemical insights in the microscopic and molecular level of interactions between TTMAPP species and the solvent components and, therefore, can be used to interpret the solvent effect on kinetics and thermodynamics of TTMAPP.     

Graphene oxide reinforced polyamide nanocomposite coated on paper as a novel layered sorbent for microextraction by packed sorbent

ABSTRACT

In this work, a novel layered sorbent for microextraction by packed sorbent (MEPS) was introduced, which has been prepared by coating graphene oxide/polyamide (GO/PA) nanocomposite (NC) onto cellulose paper through solvent exchange method. Scanning electron microscopy (SEM) was applied to investigate the surface characteristic and morphology of PA and GO/PA NC coated on cellulose paper. The prepared MEPS device was used for extraction of organophosphorous pesticides (OPPs) including chlorpyrifos, fenthion, fenithrothion, ethion, edifenphos and phosalone in environmental aqueous samples followed by detection using gas chromatography-flame ionisation detector (GC-FID). Important parameters affecting the MEPS method including pH of sample solution, extraction draw-discard cycles, sorbent layers, desorption solvent volume and desorption draw-eject number were studied and optimised using central composite design (CCD). Based on the method validation, limits of detection (LODs) were in the range of 0.2–1 µg L^?1. The calibration graphs for chlorpyrifos, fenthion and edifenphos are linear in the concentration range of 1 to 500 µg L^?1; for ethion and phosalone are linear in the range of 1–1000 µg L^?1 and for fenithrothion is linear in the range of 3–1000 µg L^?1. The method precision (RSD %) with six replicates determinations was in the range of 3 to 9.4 % and 3.9 to 11.9% for distilled water and spiked river water sample, respectively, at the concentration level of 300 µg L^?1 . The developed method was applied successfully to determine OPP compounds in river, dam and tap water samples; accordingly, the relative recoveries (RR%) were obtained in the range of 77.8 to 113.3%.     

Uranium recovery from UCF liquid waste by nanoporous MCM-41: breakthrough capacity and elution behavior studies

Adsorption and recovery of uranium by nanoporous MCM-41 from aqueous solutions (synthetic solution and uranium conversion facility liquid waste) were investigated by use of a fixed-bed column (1.2 cm diameter and 3.0 cm height). Adsorption was carried out at flow rates 0.2 and 0.5 mL min^?1, which correspond to retention times of 10 and 6 min. The maximum breakthrough capacity for uranium ions was achieved by use of nanoporous MCM-41 at the optimum pH of 3.6 and flow rate 0.2 mL min^?1 (61.95 μg g^?1). The Thomas and Yan models were applied to the experimental data, by use of linear regression, to determine the characteristics of the column for process design. The breakthrough curves calculated from the models were in good agreement with the experimental data. The elution behavior of uranium on nanoporous MCM-41 was studied with different eluents; the results showed that 0.1 M HCl is good eluent for uranium recovery. The regenerated column could be used in a multitude of adsorption–desorption cycles.     

BSA optimization and dosimetric assessment for an electron linac based BNCT of deep‐seated brain tumors

A study was conducted to investigate a photoneutron spectrum based on a 25 MeV electron linac for treatment of deep-seated brain tumors in the context of boron neutron capture therapy (BNCT). Based on a series of Mont Carlo N-Particle simulations, tungsten and uranium with optimized geometry were selected as the most appropriate converters for (e,γ) and (γ,n) reactions, respectively. The final optimized photoneutron source yield was 5.78 × 10¹³ n/s/mA, which is a high value for these kinds of sources. A beam shaping assembly (BSA) for the proposed neutron source containing optimal moderators, filter, reflector, and collimator was simulated. Results showed that using this BSA enables us to meet International atomic energy agency recommended figures of merit at the BSA beam port. Also, the calculated in-phantom figures of merit and dose evaluation results via a simulated head phantom confirmed that the designed neutron source and its related BSA configuration can potentially treat deep-seated brain tumors in BNCT framework. In the present study, some in-phantom figures of merit such as advantage depth, advantage depth dose rate, advantage ratio, and treatment time are 7.6 cm, 0.7 Gy/min, 4.2, and 17.8 min, respectively.     

Synthesis,crystal structure,and electrochemical properties of Ni(II) and Cu(II) complexes with two unsymmetrical N2O2 Schiff base ligands

Nickel(II) and copper(II) complexes of two unsymmetrical tetradentate Schiff base ligands [Ni(Me-salabza)] (1), [Cu(Me-salabza)] (2) and [Ni(salabza)] (3), {H₂salabza = N,N′-bis[(salicylidene)-2-aminobenzylamine] and H₂Me-salabza = N,N′-bis[(methylsalicylidene)-2-aminobenzylamine]}, have been synthesized and characterized by elemental analysis and spectroscopic methods. The crystal structures of 2 and 3 complexes have been determined by single crystal X-ray diffraction. Both copper(II) and nickel(II) ions adopt a distorted square planar geometry in [Cu(Me-salabza)] and [Ni(salabza)] complexes. The cyclic voltammetric studies of these complexes in dichloromethane indicate the electronic effects of the methyl groups on redox potential.     

Environmentally green approach to synthesize azo dyes based on 1-naphthol using nano BF3·SiO2 under solvent-free conditions

A series of azo dyes were efficiently synthesized by mixing aromatic amines and NaNO₂ in the presence of nano silica supported boron trifluoride (nano BF₃·SiO₂) and then diazo coupling with 1-naphthol under solvent-free conditions at room temperature. The present methodology has proven to be simple, rapid, environmentally benign, green, and cost-effective compared with previous synthetic methods. Also, by using this procedure, aryl diazonium salts supported on nano BF₃·SiO₂ were very stable to be kept at room temperature for several months without any special conditions.     

Solvent-free one-pot synthesis of 4-aryl-3,5-dimethyl-1,4,7,8-tetrahydrodipyrazolo[3,4-b:4′,3′-e]pyridines using Fe3O4@SiO2@(BuSO3H)3 catalytic Fe3+ system as selective colorimetric

Research on Chemical Intermediates - The synthesis of 4-Aryl-(3,5-dimethyl-1,4,7,8-tetrahydro-dipyrazolo[3,4b:4′,3′e]pyridine derivatives was accomplished using Fe3O4@SiO2@(BuSO3H)3...     

Tunable self-assembled stereocomplexed-polylactic acid nanoparticles as a drug carrier

In this study, a model hydrophilic drug (porphyrin) was encapsulated within hydrophobic polylactic acid (PLA) nanoparticles (NPs) with different crystallinity and the relevant release behaviors were investigated. The crystalline modification was done using a modified nanoprecipitation method, where homo and stereocomplexed PLA NPs with different average diameters based on varying polymer concentrations and solvent/nonsolvent ratios (S/N) were prepared. Entrapment efficiency and drug release of sterocomplexed-PLA NPs were compared with neat poly(l -lactic acid) (PLLA) NPs. Furthermore, to get the more sustained release, porphyrin-loaded NPs were immobilized within electrospun poly(d ,l -lactide-co-glycolide (PLGA) nanofibers (NFs). Outcomes revealed that solution concentration and solvent/nonsolvent ratio play significant roles in the formation of homo and stereocomplexed NPs. On the other hand, it was found that the formation of stereocrystals did not significantly affect the size and morphology of NPs compared with neat NPs. With regard to the entrapment efficiency and drug content, stereocomplexd-PLA NPs behave relatively the same as neat PLLA NPs while the more sustained release was observed for stereocomplexed NPs. Also, it was observed that electrospinning of PLGA solution loaded by NPs led to the uniform distribution of NPs into PLGA fibers. Encapsulating the drug-loaded NPs into nanofibers decreased the rate of drug release by 50% after 24 h, compared with direct loading of drug into PLGA NFs. We conclude that it is possible to tune the entrapment efficiency and modify the release rate of the drug by giving small changes in the process parameters without altering the physical properties of the original drug substance and polymer.